RM 620 Phase 2

Location From Cornerwood to Deepwood Drive
Description This RM 620 project is approximately 2.74 miles in length and is made up of two segments.

Segment 1 (Cornerwood Drive to Wyoming Springs Drive):
This segment of roadway is a TxDOT project to restripe the existing four lane section to a six lane section.  Sidewalks along the north side of RM 620 in this segment are also planned; however funding has not been identified at this time.  

Segment 2 (Wyoming Springs Drive to Deep Wood Drive):
This segment of roadway is a Williamson County project to widen the roadway from four to six lanes and will include new curb and gutter and a raised median.  This segment will also include left and right-hand turn lanes, culverts, water-quality facilities, retaining walls and construction of sidewalk along the north side of RM 620 to fill in the current gaps.

Williamson County’s contractor Cox Commercial is scheduled to set a long term, full closure of Oakwood Blvd at RM 620 for the purpose of installing drainage structures.  

The closure of Oakwood Blvd at RM 620 will be closed from Monday, September 18, to Tuesday, September 26.  Traffic will be detoured to Oaklands Drive which is located just east of Oakwood Blvd.  Access to driveways and the other side streets within the project limits will be maintained at all times.

Traffic will be detoured to from Oakwood Blvd to Oaklands Drive via RM 620 or from Oak Park Drive and Spring Hollow Path.  Electronic message boards are in place along RM 620 to provide advance notification of closure. To view the detour route, click here.



 

Status Segment 1: To be completed by TxDOT as funding becomes available.

Segment 2: The bid was awarded to Cox Commercial Construction on November 30, 2016. Construction started on January 13, 2017, and is anticipated to be completed in Spring 2018. 
Contact Email roads@wilco.org or phone 512-943-1195

Sign up for updates



Submit           
 

Project Map